use the distributive property to rewrite and find 4(x+2)

snowlovelydayM 2021-03-06 Answered

use the distributive property to rewrite and find 4(x+2)

Ask Expert 1 See Answers

You can still ask an expert for help

Expert Answer

bahaistag

Answered 2021-03-07 Author has 101 answers

The Distributive Property states that a(b+c)=ab+aca(b+c)=ab+ac. Therefore:
4(x+2)=4x+4(2) Use the Distributive Property.Multiply.
=4x+8 Multiply.

This is helpful

This is helpful 26

You might be interested in

asked 2022-04-23

Let 𝑊 be the set of vectors of the form 𝑎, 𝑎
2
, 𝑏 . Show
that 𝑊 is not a subspace of ℝ3
.

See answers (0)

asked 2021-12-21

9 x^{2} - 10 x + 1

- 2 x^{2} + 4 x - 10

See answers (3)

asked 2022-05-26

2 x - 3 y + 4 z = - 19 6 x + 4 y - 2 z = 8 x + 5 y + 4 z = 23

what I have done so far is I put the nubmer and x,y and z in matrix form:

[\begin{matrix} 2 & - 3 & 4 \\ 6 & 4 & - 2 \\ 1 & 5 & 4 \end{matrix}] [\begin{matrix} x \\ y \\ z \end{matrix}] = [\begin{matrix} - 19 \\ 8 \\ 23 \end{matrix}]

See answers (2)

asked 2022-03-30

How to systematically find roots of

x^{2} - x - 132 = 0

with Po-Shen Loh's method?

See answers (1)

asked 2022-04-10

The sum of the values of a for which

\frac{x^{3} - 6 x^{2} + 11 x - 6}{x^{3} + x^{2} - 10 x + 8} + \frac{a}{30} = 0

does not have a real solution is
A. 1
B. 12
C. 13
D. 2

See answers (1)

asked 2022-05-22

Specify a development member that does not contain an irrational number (

{(\sqrt{5} - \sqrt[3]{2} + 2)}^{6}

See answers (1)

asked 2022-07-02

One similiarly shows, with the help of Farkas' lemma (...): if a system Ax <= b of n variables has no solution, then Ax <= b has a subsystem A'x <= b' of at most n + 1 inequalities having no solution.

See answers (2)

New questions

Finding unknown in log equation
I was given a log equation:

D = 10 \log (I / I_{0})

I

is the unknown in this case,

I_{0} = 10^{- 12}

D = 89.3

I did the following steps:

\begin{aligned} 89.3 & = 10 \log (\frac{I}{10^{- 12}}) \\ \frac{89.3}{10} & = \log (\frac{I}{10^{- 12}}) \\ 8.93 & = \log (\frac{I}{10^{- 12}}) \end{aligned}

I'm not quite sure how to isolate I after step 3, and I'm also unsure if dividing

89.3 / 10

is correct as well. So how can I find the unknown (

I

Express the given decimal as a percentage and a reduced fraction. 0.75
What is the percentage form of 0.75?

u = ⟨ 2, - 4 ⟩ and v = ⟨ 5, - 3 ⟩

. Find the angle between them to the nearest tenth of a degree

Why does the same inequality give different answers?

(\log_{2} (x) - 2) (\log_{2} (x) + 1) < 0

\frac{1}{2} < x < 4

But when we take the second part alone that is

(\log_{2} (x) + 1) < 0

it gives a solution

0 < x < \frac{1}{2}

x > \frac{1}{2}

in the first case but

x < \frac{1}{2}

in the second case?

The limit of a sequence
Given

x_{n} = \frac{1}{n^{2} + 1} + \frac{1}{n^{2} + 2} + \frac{1}{n^{2} + 3} + \dots + \frac{1}{n^{2} + n}

Verify if there is or no a limit. Find it if affirmative.
Let

a_{n} = \frac{n}{n^{2} + 1}

(The biggest portion of the sum

n

b_{n} = \frac{n}{n^{2} + n}

(the smallest portion of the sum

n

b_{n} \leq x_{n} \leq a_{n}

b_{n} \leq x_{n} \leq a_{n}

lim \frac{n}{n^{2} + 1} = lim \frac{n}{n^{2} + n} = 0,

lim x_{n} = 0.

Is this wrong? why? If it is, any tips on how to find

lim x_{n}

? Grateful for any help.

Condensing Fractional Logarithms
Does the following condense to the following:

\log_{2} z + (\log_{2} x) / 2 + (\log_{2} y) / 2 = \log_{2} (z \sqrt{x} \sqrt{y})

\log_{2} (z \sqrt{x y})

Other approaches to evaluate

lim_{h \to 0} \frac{4^{x + h} + 4^{x - h} - 4^{x + \frac{1}{2}}}{h^{2}}

A yacht is 20 meters(m) long. Express that amount in feet (fr)?
a. 66meters
b.54 feet
c.68 feet
d.66 feet

y = 1 - x + \frac{x^{2}}{2!} - \frac{x^{3}}{3!} + \dots

z = - y - \frac{y^{2}}{2} - \frac{y^{3}}{3} - \dots

\ln (\frac{1}{1 - e^{x}})

y = e^{- x}

z = \ln (1 - y)

z = \ln (1 - e^{- x})

. But how to go further?

How to convert feet and inches to decimal feet?
What is the proper way of converting feet inches to decimal feet?
For example
15 ft - 4, 1/8 inch = 15.34'
I understand that the 15 get's moved but how do you take 4 1/8" and turn that into 0.34?