1) A different group of participants for each the treatment conditions being compared.
2) \(\displaystyle{n}_{{1}}+{n}_{{2}}-{2}{N}{S}{K}{13}+{13}-{2}{N}{S}{K}{24}\)

Question

asked 2020-11-01

Give full and correct answer for this questions
1) The standard erroe of the population mean can be estimated by
2)For an experiment comparing two treatment conditions, an independent-measures design would obtain ? score(s) for each subject and a repeated-measures design would obtains ? score(s) for each subject.
3) Which of the following describes an independent-measures research study?

asked 2021-02-06

Give a full answer for the given question When you do an analysis of variance
Group of answer choices:
you compare estimates of the population variance for each group.
you need fewer participants than for a t test for independent means.
you compare two estimates of the population variance.
you figure difference scores, as in a t test for dependent means.

asked 2021-02-25

Iron is very important for babies' growth. A common belief is that breastfeeding will help the baby to get more iron than formula feeding. To justify the belief, a study followed 2 groups of babies from born to 6 months. With one group babies are breast fed, and the other group are formula fed without iron supplements. Data below shows iron levels of those two groups of babies.
\(\displaystyle{b}{e}{g}\in{\left\lbrace{a}{r}{r}{a}{y}\right\rbrace}{\left\lbrace{\left|{c}\right|}{c}{\mid}\right\rbrace}{h}{l}\in{e}{G}{r}{o}{u}{p}&{S}{a}\mp\le\ {s}{i}{z}{e}&{m}{e}{a}{n}&{S}{\tan{{d}}}{a}{r}{d}\ {d}{e}{v}{i}{a}{t}{i}{o}{n}\backslash{h}{l}\in{e}{B}{r}{e}\ast-{f}{e}{d}&{23}&{13.3}&{1.7}\backslash{h}{l}\in{e}{F}{\quad\text{or}\quad}\mu{l}{a}-{f}{e}{d}&{23}&{12.4}&{1.8}\backslash{h}{l}\in{e}{D}{I}{F}{F}={B}{r}{e}\ast-{F}{\quad\text{or}\quad}\mu{l}{a}&{23}&{0.9}&{1.4}\backslash{e}{n}{d}{\left\lbrace{a}{r}{r}{a}{y}\right\rbrace}\)
(1) There are two groups we need to compare for the study: Breast-Fed and Formula- Fed. Are those two groups dependent or independent? Based on your answer, what inference procedure should we apply for this research?
(2) Please perform the inference you decided in (1), and make sure to follow the 5-step procedure for any hypothesis test.
(3) Based on your conclusion in (2), what kind of error could you make? Explain the type of error using the context words for this research

asked 2021-02-25

Give a full and correct answer
Why is it important that a sample be random and representative when conducting hypothesis testing?
Representative Sample vs. Random Sample: An Overview
Economists and researchers seek to reduce sampling bias to near negligible levels when employing statistical analysis. Three basic characteristics in a sample reduce the chances of sampling bias and allow economists to make more confident inferences about a general population from the results obtained from the sample analysis or study:
* Such samples must be representative of the chosen population studied.
* They must be randomly chosen, meaning that each member of the larger population has an equal chance of being chosen.
* They must be large enough so as not to skew the results. The optimal size of the sample group depends on the precise degree of confidence required for making an inference.
Representative sampling and random sampling are two techniques used to help ensure data is free of bias. These sampling techniques are not mutually exclusive and, in fact, they are often used in tandem to reduce the degree of sampling error in an analysis and allow for greater confidence in making statistical inferences from the sample in regard to the larger group.
Representative Sample
A representative sample is a group or set chosen from a larger statistical population or group of factors or instances that adequately replicates the larger group according to whatever characteristic or quality is under study.
A representative sample parallels key variables and characteristics of the large society under examination. Some examples include sex, age, education level, socioeconomic status (SES), or marital status. A larger sample size reduced sampling error and increases the likelihood that the sample accurately reflects the target population.
Random Sample
A random sample is a group or set chosen from a larger population or group of factors of instances in a random manner that allows for each member of the larger group to have an equal chance of being chosen. A random sample is meant to be an unbiased representation of the larger population. It is considered a fair way to select a sample from a larger population since every member of the population has an equal chance of getting selected.
Special Considerations:
People collecting samples need to ensure that bias is minimized. Representative sampling is one of the key methods of achieving this because such samples replicate as closely as possible elements of the larger population under study. This alone, however, is not enough to make the sampling bias negligible. Combining the random sampling technique with the representative sampling method reduces bias further because no specific member of the representative population has a greater chance of selection into the sample than any other.
Summarize this article in 250 words.

asked 2020-12-28

Is statistical inference intuitive to babies? In other words, are babies able to generalize from sample to population? In this study,1 8-month-old infants watched someone draw a sample of five balls from an opaque box. Each sample consisted of four balls of one color (red or white) and one ball of the other color. After observing the sample, the side of the box was lifted so the infants could see all of the balls inside (the population). Some boxes had an “expected” population, with balls in the same color proportions as the sample, while other boxes had an “unexpected” population, with balls in the opposite color proportion from the sample. Babies looked at the unexpected populations for an average of 9.9 seconds (sd = 4.5 seconds) and the expected populations for an average of 7.5 seconds (sd = 4.2 seconds). The sample size in each group was 20, and you may assume the data in each group are reasonably normally distributed. Is this convincing evidence that babies look longer at the unexpected population, suggesting that they make inferences about the population from the sample?
Let group 1 and group 2 be the time spent looking at the unexpected and expected populations, respectively.
A) Calculate the relevant sample statistic.
Enter the exact answer.
Sample statistic: _____
B) Calculate the t-statistic.
Round your answer to two decimal places.
t-statistic = ___________
C) Find the p-value.
Round your answer to three decimal places.
p-value =

asked 2021-02-09

A two-sample inference deals with dependent and independent inferences. In a two-sample hypothesis testing problem, underlying parameters of two different populations are compared. In a longitudinal (or follow-up) study, the same group of people is followed over time. Two samples are said to be paired when each data point in the first sample is matched and related to a unique data point in the second sample.

This problem demonstrates inference from two dependent (follow-up) samples using the data from the hypothetical study of new cases of tuberculosis (TB) before and after the vaccination was done in several geographical areas in a country in sub-Saharan Africa. Conclusion about the null hypothesis is to note the difference between samples.

The problem that demonstrates inference from two dependent samples uses hypothetical data from the TB vaccinations and the number of new cases before and after vaccination. PSK\begin{array}{|c|c|} \hline Geographical\ regions & Before\ vaccination & After\ vaccination\\ \hline 1 & 85 & 11\\ \hline 2 & 77 & 5\\ \hline 3 & 110 & 14\\ \hline 4 & 65 & 12\\ \hline 5 & 81 & 10\\\hline 6 & 70 & 7\\ \hline 7 & 74 & 8\\ \hline 8 & 84 & 11\\ \hline 9 & 90 & 9\\ \hline 10 & 95 & 8\\ \hline \end{array}ZSK

Using the Minitab statistical analysis program to enter the data and perform the analysis, complete the following: Construct a one-sided \(\displaystyle{95}\%\) confidence interval for the true difference in population means. Test the null hypothesis that the population means are identical at the 0.05 level of significance.

This problem demonstrates inference from two dependent (follow-up) samples using the data from the hypothetical study of new cases of tuberculosis (TB) before and after the vaccination was done in several geographical areas in a country in sub-Saharan Africa. Conclusion about the null hypothesis is to note the difference between samples.

The problem that demonstrates inference from two dependent samples uses hypothetical data from the TB vaccinations and the number of new cases before and after vaccination. PSK\begin{array}{|c|c|} \hline Geographical\ regions & Before\ vaccination & After\ vaccination\\ \hline 1 & 85 & 11\\ \hline 2 & 77 & 5\\ \hline 3 & 110 & 14\\ \hline 4 & 65 & 12\\ \hline 5 & 81 & 10\\\hline 6 & 70 & 7\\ \hline 7 & 74 & 8\\ \hline 8 & 84 & 11\\ \hline 9 & 90 & 9\\ \hline 10 & 95 & 8\\ \hline \end{array}ZSK

Using the Minitab statistical analysis program to enter the data and perform the analysis, complete the following: Construct a one-sided \(\displaystyle{95}\%\) confidence interval for the true difference in population means. Test the null hypothesis that the population means are identical at the 0.05 level of significance.

asked 2021-01-28

Indicate true or false for the following statements. If false, specify what change will make the statement true.

a) In the two-sample t test, the number of degrees of freedom for the test statistic increases as sample sizes increase.

b) When the means of two independent samples are used to to compare two population means, we are dealing with dependent (paired) samples.

c) The \(\displaystyle{x}^{{{2}}}\) distribution is used for making inferences about two population variances.

d) The standard normal (z) score may be used for inferences concerning population proportions.

e) The F distribution is symmetric and has a mean of 0.

f) The pooled variance estimate is used when comparing means of two populations using independent samples.

g) It is not necessary to have equal sample sizes for the paired t test.

a) In the two-sample t test, the number of degrees of freedom for the test statistic increases as sample sizes increase.

b) When the means of two independent samples are used to to compare two population means, we are dealing with dependent (paired) samples.

c) The \(\displaystyle{x}^{{{2}}}\) distribution is used for making inferences about two population variances.

d) The standard normal (z) score may be used for inferences concerning population proportions.

e) The F distribution is symmetric and has a mean of 0.

f) The pooled variance estimate is used when comparing means of two populations using independent samples.

g) It is not necessary to have equal sample sizes for the paired t test.

asked 2020-10-23

The table below shows the number of people for three different race groups who were shot by police that were either armed or unarmed. These values are very close to the exact numbers. They have been changed slightly for each student to get a unique problem.

Suspect was Armed:

Black - 543

White - 1176

Hispanic - 378

Total - 2097

Suspect was unarmed:

Black - 60

White - 67

Hispanic - 38

Total - 165

Total:

Black - 603

White - 1243

Hispanic - 416

Total - 2262

Give your answer as a decimal to at least three decimal places.

a) What percent are Black?

b) What percent are Unarmed?

c) In order for two variables to be Independent of each other, the P \((A and B) = P(A) \cdot P(B) P(A and B) = P(A) \cdot P(B).\)

This just means that the percentage of times that both things happen equals the individual percentages multiplied together (Only if they are Independent of each other).

Therefore, if a person's race is independent of whether they were killed being unarmed then the percentage of black people that are killed while being unarmed should equal the percentage of blacks times the percentage of Unarmed. Let's check this. Multiply your answer to part a (percentage of blacks) by your answer to part b (percentage of unarmed).

Remember, the previous answer is only correct if the variables are Independent.

d) Now let's get the real percent that are Black and Unarmed by using the table?

If answer c is "significantly different" than answer d, then that means that there could be a different percentage of unarmed people being shot based on race. We will check this out later in the course.

Let's compare the percentage of unarmed shot for each race.

e) What percent are White and Unarmed?

f) What percent are Hispanic and Unarmed?

If you compare answers d, e and f it shows the highest percentage of unarmed people being shot is most likely white.

Why is that?

This is because there are more white people in the United States than any other race and therefore there are likely to be more white people in the table. Since there are more white people in the table, there most likely would be more white and unarmed people shot by police than any other race. This pulls the percentage of white and unarmed up. In addition, there most likely would be more white and armed shot by police. All the percentages for white people would be higher, because there are more white people. For example, the table contains very few Hispanic people, and the percentage of people in the table that were Hispanic and unarmed is the lowest percentage.

Think of it this way. If you went to a college that was 90% female and 10% male, then females would most likely have the highest percentage of A grades. They would also most likely have the highest percentage of B, C, D and F grades

The correct way to compare is "conditional probability". Conditional probability is getting the probability of something happening, given we are dealing with just the people in a particular group.

g) What percent of blacks shot and killed by police were unarmed?

h) What percent of whites shot and killed by police were unarmed?

i) What percent of Hispanics shot and killed by police were unarmed?

You can see by the answers to part g and h, that the percentage of blacks that were unarmed and killed by police is approximately twice that of whites that were unarmed and killed by police.

j) Why do you believe this is happening?

Do a search on the internet for reasons why blacks are more likely to be killed by police. Read a few articles on the topic. Write your response using the articles as references. Give the websites used in your response. Your answer should be several sentences long with at least one website listed. This part of this problem will be graded after the due date.

Suspect was Armed:

Black - 543

White - 1176

Hispanic - 378

Total - 2097

Suspect was unarmed:

Black - 60

White - 67

Hispanic - 38

Total - 165

Total:

Black - 603

White - 1243

Hispanic - 416

Total - 2262

Give your answer as a decimal to at least three decimal places.

a) What percent are Black?

b) What percent are Unarmed?

c) In order for two variables to be Independent of each other, the P \((A and B) = P(A) \cdot P(B) P(A and B) = P(A) \cdot P(B).\)

This just means that the percentage of times that both things happen equals the individual percentages multiplied together (Only if they are Independent of each other).

Therefore, if a person's race is independent of whether they were killed being unarmed then the percentage of black people that are killed while being unarmed should equal the percentage of blacks times the percentage of Unarmed. Let's check this. Multiply your answer to part a (percentage of blacks) by your answer to part b (percentage of unarmed).

Remember, the previous answer is only correct if the variables are Independent.

d) Now let's get the real percent that are Black and Unarmed by using the table?

If answer c is "significantly different" than answer d, then that means that there could be a different percentage of unarmed people being shot based on race. We will check this out later in the course.

Let's compare the percentage of unarmed shot for each race.

e) What percent are White and Unarmed?

f) What percent are Hispanic and Unarmed?

If you compare answers d, e and f it shows the highest percentage of unarmed people being shot is most likely white.

Why is that?

This is because there are more white people in the United States than any other race and therefore there are likely to be more white people in the table. Since there are more white people in the table, there most likely would be more white and unarmed people shot by police than any other race. This pulls the percentage of white and unarmed up. In addition, there most likely would be more white and armed shot by police. All the percentages for white people would be higher, because there are more white people. For example, the table contains very few Hispanic people, and the percentage of people in the table that were Hispanic and unarmed is the lowest percentage.

Think of it this way. If you went to a college that was 90% female and 10% male, then females would most likely have the highest percentage of A grades. They would also most likely have the highest percentage of B, C, D and F grades

The correct way to compare is "conditional probability". Conditional probability is getting the probability of something happening, given we are dealing with just the people in a particular group.

g) What percent of blacks shot and killed by police were unarmed?

h) What percent of whites shot and killed by police were unarmed?

i) What percent of Hispanics shot and killed by police were unarmed?

You can see by the answers to part g and h, that the percentage of blacks that were unarmed and killed by police is approximately twice that of whites that were unarmed and killed by police.

j) Why do you believe this is happening?

Do a search on the internet for reasons why blacks are more likely to be killed by police. Read a few articles on the topic. Write your response using the articles as references. Give the websites used in your response. Your answer should be several sentences long with at least one website listed. This part of this problem will be graded after the due date.

asked 2021-01-17

A new thermostat has been engineered for the frozen food cases in large supermarkets. Both the old and new thermostats hold temperatures at an average of \(25^{\circ}F\). However, it is hoped that the new thermostat might be more dependable in the sense that it will hold temperatures closer to \(25^{\circ}F\). One frozen food case was equipped with the new thermostat, and a random sample of 21 temperature readings gave a sample variance of 5.1. Another similar frozen food case was equipped with the old thermostat, and a random sample of 19 temperature readings gave a sample variance of 12.8. Test the claim that the population variance of the old thermostat temperature readings is larger than that for the new thermostat. Use a \(5\%\) level of significance. How could your test conclusion relate to the question regarding the dependability of the temperature readings? (Let population 1 refer to data from the old thermostat.)

(a) What is the level of significance?

State the null and alternate hypotheses.

\(H0:?_{1}^{2}=?_{2}^{2},H1:?_{1}^{2}>?_{2}^{2}H0:?_{1}^{2}=?_{2}^{2},H1:?_{1}^{2}\neq?_{2}^{2}H0:?_{1}^{2}=?_{2}^{2},H1:?_{1}^{2}?_{2}^{2},H1:?_{1}^{2}=?_{2}^{2}\)

(b) Find the value of the sample F statistic. (Round your answer to two decimal places.)

What are the degrees of freedom?

\(df_{N} = ?\)

\(df_{D} = ?\)

What assumptions are you making about the original distribution?

The populations follow independent normal distributions. We have random samples from each population.The populations follow dependent normal distributions. We have random samples from each population.The populations follow independent normal distributions.The populations follow independent chi-square distributions. We have random samples from each population.

(c) Find or estimate the P-value of the sample test statistic. (Round your answer to four decimal places.)

(d) Based on your answers in parts (a) to (c), will you reject or fail to reject the null hypothesis?

At the ? = 0.05 level, we fail to reject the null hypothesis and conclude the data are not statistically significant.At the ? = 0.05 level, we fail to reject the null hypothesis and conclude the data are statistically significant. At the ? = 0.05 level, we reject the null hypothesis and conclude the data are not statistically significant.At the ? = 0.05 level, we reject the null hypothesis and conclude the data are statistically significant.

(e) Interpret your conclusion in the context of the application.

Reject the null hypothesis, there is sufficient evidence that the population variance is larger in the old thermostat temperature readings.Fail to reject the null hypothesis, there is sufficient evidence that the population variance is larger in the old thermostat temperature readings. Fail to reject the null hypothesis, there is insufficient evidence that the population variance is larger in the old thermostat temperature readings.Reject the null hypothesis, there is insufficient evidence that the population variance is larger in the old thermostat temperature readings.

(a) What is the level of significance?

State the null and alternate hypotheses.

\(H0:?_{1}^{2}=?_{2}^{2},H1:?_{1}^{2}>?_{2}^{2}H0:?_{1}^{2}=?_{2}^{2},H1:?_{1}^{2}\neq?_{2}^{2}H0:?_{1}^{2}=?_{2}^{2},H1:?_{1}^{2}?_{2}^{2},H1:?_{1}^{2}=?_{2}^{2}\)

(b) Find the value of the sample F statistic. (Round your answer to two decimal places.)

What are the degrees of freedom?

\(df_{N} = ?\)

\(df_{D} = ?\)

What assumptions are you making about the original distribution?

The populations follow independent normal distributions. We have random samples from each population.The populations follow dependent normal distributions. We have random samples from each population.The populations follow independent normal distributions.The populations follow independent chi-square distributions. We have random samples from each population.

(c) Find or estimate the P-value of the sample test statistic. (Round your answer to four decimal places.)

(d) Based on your answers in parts (a) to (c), will you reject or fail to reject the null hypothesis?

At the ? = 0.05 level, we fail to reject the null hypothesis and conclude the data are not statistically significant.At the ? = 0.05 level, we fail to reject the null hypothesis and conclude the data are statistically significant. At the ? = 0.05 level, we reject the null hypothesis and conclude the data are not statistically significant.At the ? = 0.05 level, we reject the null hypothesis and conclude the data are statistically significant.

(e) Interpret your conclusion in the context of the application.

Reject the null hypothesis, there is sufficient evidence that the population variance is larger in the old thermostat temperature readings.Fail to reject the null hypothesis, there is sufficient evidence that the population variance is larger in the old thermostat temperature readings. Fail to reject the null hypothesis, there is insufficient evidence that the population variance is larger in the old thermostat temperature readings.Reject the null hypothesis, there is insufficient evidence that the population variance is larger in the old thermostat temperature readings.

asked 2020-10-18

Give full and correct answer for this question, the chi-square test can be used:
Select one:
a. to make inference about a population mean.
b. to test for survey error.
c. to compare more than two independent proportions.
d. for pairwise multiple comparisons of means.
e. to test for difference in two variances.