# Which of the following statements is/are correct about logistic regression? (There may be more than one correct answer) Logistic regression can be used for modeling the continuous response variable with dichotomous explanatory variable. Logistic regression can be used for modeling the dichotomous response variable with dichotomous explanatory variable Logistic regression can be used for modeling the continuous response variable with dichotomous or other type of categorical explanatory variables. Logistic regression can be used for modeling the dichotomous response variable with dichotomous and not for continuous explanatory variables. Logistic regression can be used for modeling the dichotomous response variable with categori

Question
Modeling
Which of the following statements is/are correct about logistic regression? (There may be more than one correct answer) Logistic regression can be used for modeling the continuous response variable with dichotomous explanatory variable. Logistic regression can be used for modeling the dichotomous response variable with dichotomous explanatory variable Logistic regression can be used for modeling the continuous response variable with dichotomous or other type of categorical explanatory variables. Logistic regression can be used for modeling the dichotomous response variable with dichotomous and not for continuous explanatory variables. Logistic regression can be used for modeling the dichotomous response variable with categorical explanatory variables and/or continuous explanatory variables.

2020-11-15
Logistic regression can be used for modeling the predicted categorical or continuous variable and dichotomous response variable. The correct option is: Logistic regression can be used for modeling the dichotomous response variable with categorical explanatory variables or continuous explanatory variables.

### Relevant Questions

Which of the following statements is/are correct about logistic regression? Logistic regression can be used for modeling the continuous response variable with dichotomous explanatory variable. Logistic regression can be used for modeling the dichotomous response variable with dichotomous explanatory variable. Logistic regression can be used for modeling the continuous response variable with dichotomous or other type of categorical explanatory variables. Logistic regression can be used for modeling the dichotomous response variable with dichotomous and not for continuous explanatory variables. Logistic regression can be used for modeling the dichotomous response variable with categorical explanatory variables and/or continuous explanatory variables.
We will now add support for register-memory ALU operations to the classic five-stage RISC pipeline. To offset this increase in complexity, all memory addressing will be restricted to register indirect (i.e., all addresses are simply a value held in a register; no offset or displacement may be added to the register value). For example, the register-memory instruction add x4, x5, (x1) means add the contents of register x5 to the contents of the memory location with address equal to the value in register x1 and put the sum in register x4. Register-register ALU operations are unchanged. The following items apply to the integer RISC pipeline:
a. List a rearranged order of the five traditional stages of the RISC pipeline that will support register-memory operations implemented exclusively by register indirect addressing.
b. Describe what new forwarding paths are needed for the rearranged pipeline by stating the source, destination, and information transferred on each needed new path.
c. For the reordered stages of the RISC pipeline, what new data hazards are created by this addressing mode? Give an instruction sequence illustrating each new hazard.
d. List all of the ways that the RISC pipeline with register-memory ALU operations can have a different instruction count for a given program than the original RISC pipeline. Give a pair of specific instruction sequences, one for the original pipeline and one for the rearranged pipeline, to illustrate each way.
Hint for (d): Give a pair of instruction sequences where the RISC pipeline has “more” instructions than the reg-mem architecture. Also give a pair of instruction sequences where the RISC pipeline has “fewer” instructions than the reg-mem architecture.
Answer true or false to each of the following statements and explain your answers. Polynomial regression equations are useful for modeling more complex curvature in regression equations than can be handled by using the method of transformations.

A random sample of $$n_1 = 14$$ winter days in Denver gave a sample mean pollution index $$x_1 = 43$$.
Previous studies show that $$\sigma_1 = 19$$.
For Englewood (a suburb of Denver), a random sample of $$n_2 = 12$$ winter days gave a sample mean pollution index of $$x_2 = 37$$.
Previous studies show that $$\sigma_2 = 13$$.
Assume the pollution index is normally distributed in both Englewood and Denver.
(a) State the null and alternate hypotheses.
$$H_0:\mu_1=\mu_2.\mu_1>\mu_2$$
$$H_0:\mu_1<\mu_2.\mu_1=\mu_2$$
$$H_0:\mu_1=\mu_2.\mu_1<\mu_2$$
$$H_0:\mu_1=\mu_2.\mu_1\neq\mu_2$$
(b) What sampling distribution will you use? What assumptions are you making? NKS The Student's t. We assume that both population distributions are approximately normal with known standard deviations.
The standard normal. We assume that both population distributions are approximately normal with unknown standard deviations.
The standard normal. We assume that both population distributions are approximately normal with known standard deviations.
The Student's t. We assume that both population distributions are approximately normal with unknown standard deviations.
(c) What is the value of the sample test statistic? Compute the corresponding z or t value as appropriate.
(Test the difference $$\mu_1 - \mu_2$$. Round your answer to two decimal places.) NKS (d) Find (or estimate) the P-value. (Round your answer to four decimal places.)
(e) Based on your answers in parts (i)−(iii), will you reject or fail to reject the null hypothesis? Are the data statistically significant at level \alpha?
At the $$\alpha = 0.01$$ level, we fail to reject the null hypothesis and conclude the data are not statistically significant.
At the $$\alpha = 0.01$$ level, we reject the null hypothesis and conclude the data are statistically significant.
At the $$\alpha = 0.01$$ level, we fail to reject the null hypothesis and conclude the data are statistically significant.
At the $$\alpha = 0.01$$ level, we reject the null hypothesis and conclude the data are not statistically significant.
(f) Interpret your conclusion in the context of the application.
Reject the null hypothesis, there is insufficient evidence that there is a difference in mean pollution index for Englewood and Denver.
Reject the null hypothesis, there is sufficient evidence that there is a difference in mean pollution index for Englewood and Denver.
Fail to reject the null hypothesis, there is insufficient evidence that there is a difference in mean pollution index for Englewood and Denver.
Fail to reject the null hypothesis, there is sufficient evidence that there is a difference in mean pollution index for Englewood and Denver. (g) Find a 99% confidence interval for
$$\mu_1 - \mu_2$$.
lower limit
upper limit
(h) Explain the meaning of the confidence interval in the context of the problem.
Because the interval contains only positive numbers, this indicates that at the 99% confidence level, the mean population pollution index for Englewood is greater than that of Denver.
Because the interval contains both positive and negative numbers, this indicates that at the 99% confidence level, we can not say that the mean population pollution index for Englewood is different than that of Denver.
Because the interval contains both positive and negative numbers, this indicates that at the 99% confidence level, the mean population pollution index for Englewood is greater than that of Denver.
Because the interval contains only negative numbers, this indicates that at the 99% confidence level, the mean population pollution index for Englewood is less than that of Denver.
The table below shows the number of people for three different race groups who were shot by police that were either armed or unarmed. These values are very close to the exact numbers. They have been changed slightly for each student to get a unique problem.
Suspect was Armed:
Black - 543
White - 1176
Hispanic - 378
Total - 2097
Suspect was unarmed:
Black - 60
White - 67
Hispanic - 38
Total - 165
Total:
Black - 603
White - 1243
Hispanic - 416
Total - 2262
Give your answer as a decimal to at least three decimal places.
a) What percent are Black?
b) What percent are Unarmed?
c) In order for two variables to be Independent of each other, the P $$(A and B) = P(A) \cdot P(B) P(A and B) = P(A) \cdot P(B).$$
This just means that the percentage of times that both things happen equals the individual percentages multiplied together (Only if they are Independent of each other).
Therefore, if a person's race is independent of whether they were killed being unarmed then the percentage of black people that are killed while being unarmed should equal the percentage of blacks times the percentage of Unarmed. Let's check this. Multiply your answer to part a (percentage of blacks) by your answer to part b (percentage of unarmed).
Remember, the previous answer is only correct if the variables are Independent.
d) Now let's get the real percent that are Black and Unarmed by using the table?
If answer c is "significantly different" than answer d, then that means that there could be a different percentage of unarmed people being shot based on race. We will check this out later in the course.
Let's compare the percentage of unarmed shot for each race.
e) What percent are White and Unarmed?
f) What percent are Hispanic and Unarmed?
If you compare answers d, e and f it shows the highest percentage of unarmed people being shot is most likely white.
Why is that?
This is because there are more white people in the United States than any other race and therefore there are likely to be more white people in the table. Since there are more white people in the table, there most likely would be more white and unarmed people shot by police than any other race. This pulls the percentage of white and unarmed up. In addition, there most likely would be more white and armed shot by police. All the percentages for white people would be higher, because there are more white people. For example, the table contains very few Hispanic people, and the percentage of people in the table that were Hispanic and unarmed is the lowest percentage.
Think of it this way. If you went to a college that was 90% female and 10% male, then females would most likely have the highest percentage of A grades. They would also most likely have the highest percentage of B, C, D and F grades
The correct way to compare is "conditional probability". Conditional probability is getting the probability of something happening, given we are dealing with just the people in a particular group.
g) What percent of blacks shot and killed by police were unarmed?
h) What percent of whites shot and killed by police were unarmed?
i) What percent of Hispanics shot and killed by police were unarmed?
You can see by the answers to part g and h, that the percentage of blacks that were unarmed and killed by police is approximately twice that of whites that were unarmed and killed by police.
j) Why do you believe this is happening?
Do a search on the internet for reasons why blacks are more likely to be killed by police. Read a few articles on the topic. Write your response using the articles as references. Give the websites used in your response. Your answer should be several sentences long with at least one website listed. This part of this problem will be graded after the due date.
4.7 A multiprocessor with eight processors has 20attached tape drives. There is a large number of jobs submitted tothe system that each require a maximum of four tape drives tocomplete execution. Assume that each job starts running with onlythree tape drives for a long period before requiring the fourthtape drive for a short period toward the end of its operation. Alsoassume an endless supply of such jobs.
a) Assume the scheduler in the OS will not start a job unlessthere are four tape drives available. When a job is started, fourdrives are assigned immediately and are not released until the jobfinishes. What is the maximum number of jobs that can be inprogress at once? What is the maximum and minimum number of tapedrives that may be left idle as a result of this policy?
b) Suggest an alternative policy to improve tape driveutilization and at the same time avoid system deadlock. What is themaximum number of jobs that can be in progress at once? What arethe bounds on the number of idling tape drives?
Give a full and correct answer Why is it important that a sample be random and representative when conducting hypothesis testing? Representative Sample vs. Random Sample: An Overview Economists and researchers seek to reduce sampling bias to near negligible levels when employing statistical analysis. Three basic characteristics in a sample reduce the chances of sampling bias and allow economists to make more confident inferences about a general population from the results obtained from the sample analysis or study: * Such samples must be representative of the chosen population studied. * They must be randomly chosen, meaning that each member of the larger population has an equal chance of being chosen. * They must be large enough so as not to skew the results. The optimal size of the sample group depends on the precise degree of confidence required for making an inference. Representative sampling and random sampling are two techniques used to help ensure data is free of bias. These sampling techniques are not mutually exclusive and, in fact, they are often used in tandem to reduce the degree of sampling error in an analysis and allow for greater confidence in making statistical inferences from the sample in regard to the larger group. Representative Sample A representative sample is a group or set chosen from a larger statistical population or group of factors or instances that adequately replicates the larger group according to whatever characteristic or quality is under study. A representative sample parallels key variables and characteristics of the large society under examination. Some examples include sex, age, education level, socioeconomic status (SES), or marital status. A larger sample size reduced sampling error and increases the likelihood that the sample accurately reflects the target population. Random Sample A random sample is a group or set chosen from a larger population or group of factors of instances in a random manner that allows for each member of the larger group to have an equal chance of being chosen. A random sample is meant to be an unbiased representation of the larger population. It is considered a fair way to select a sample from a larger population since every member of the population has an equal chance of getting selected. Special Considerations: People collecting samples need to ensure that bias is minimized. Representative sampling is one of the key methods of achieving this because such samples replicate as closely as possible elements of the larger population under study. This alone, however, is not enough to make the sampling bias negligible. Combining the random sampling technique with the representative sampling method reduces bias further because no specific member of the representative population has a greater chance of selection into the sample than any other. Summarize this article in 250 words.
a. Polynomial regression equations are useful for modeling more complex curvature in regression equations than can be handled by using the method of transformations.
b. A polynomial regression equation can be estimated using the method of least squares, the same method used in multiple linear regression.
c. The term “linear” in “multiple linear regression” refers to using only first-degree terms in the predictor variables.
Consider a capital budgeting problem with six projects represented by $$0-1\ \text{variables}\ x1,\ x2,\ x3,\ x4,\ x5,\ \text{and}\ x6.$$
b. In which situation the constraint "$$x3\ -\ x5 = 0$$" is used, explain clearly:
$$\displaystyle{x}{4}\le{x}{1}$$
$$\displaystyle{x}{4}\le{x}{3}$$
$$\displaystyle{x}{4}\ge{x}{1}+{x}{3}-{1}$$
Mathematical modeling is about constructing one or two equations that represent real life situations. What are these math models used for? Provide at least two equations that can be used in the real world. For example: The equation $$s = 30\ h\ +\ 1000$$ can be used to find your salary given the fact you earn a fixed salary of $1000 per month, plus$30 per hours. Here s represents the total salary and h is the number of hours you worked.