Question

A potters wheel having a radius of 0.50 m and a moment of inertia of 12\ kg\cdot m^2 is rotating freely at 50 rev/min. The potter can stop the wheel i

Other
ANSWERED
asked 2021-02-08
A potters wheel having a radius of 0.50 m and a moment of inertia of \(\displaystyle{12}\ {k}{g}\cdot{m}^{{2}}\) is rotating freely at 50 rev/min. The potter can stop the wheel in 6.0s by pressing a wet rag against the rim and exerting a radially inward force of 70N. Find the effective coefficient of kinetic friction between the wheel and the wet rag.

Answers (1)

2021-02-09

image.

0
 
Best answer

expert advice

Have a similar question?
We can deal with it in 3 hours

Relevant Questions

asked 2021-04-03
A wheel is rotating freely at angular speed 800 rev/min on ashaft whose rotational inertia is negligible. A secod wheel,initially rest and with twice the rotational inertia of the first,is suddenly coupled to the same shaft.
A) what is the angular speedof the resultant combination of the shaft and the two wheels?
B)What fraction of the orginial rotational kinetic energy is lost?
asked 2021-02-19
A 10 kg objectexperiences a horizontal force which causes it to accelerate at 5 \(\displaystyle\frac{{m}}{{s}^{{2}}}\), moving it a distance of 20 m, horizontally.How much work is done by the force?
A ball is connected to a rope and swung around in uniform circular motion.The tension in the rope is measured at 10 N and the radius of thecircle is 1 m. How much work is done in one revolution around the circle?
A 10 kg weight issuspended in the air by a strong cable. How much work is done, perunit time, in suspending the weight?
A 5 kg block is moved up a 30 degree incline by a force of 50 N, parallel to the incline. The coefficient of kinetic friction between the block and the incline is .25. How much work is done by the 50 N force in moving the block a distance of 10 meters? What is the total workdone on the block over the same distance?
What is the kinetic energy of a 2 kg ball that travels a distance of 50 metersin 5 seconds?
A ball is thrown vertically with a velocity of 25 m/s. How high does it go? What is its velocity when it reaches a height of 25 m?
A ball with enough speed can complete a vertical loop. With what speed must the ballenter the loop to complete a 2 m loop? (Keep in mind that the velocity of the ball is not constant throughout the loop).
asked 2021-03-24
The flywheel of a punch press has a moment of inertia of \(\displaystyle{16.0}{k}{g}\cdot{m}^{{2}}\) and runs at 300 rev/min. The flywheel supplies all theenergy needed in a quick punching operation.
a)Find the speed in rev/min to which the fly wheel will be reducedby a sudden punching operation requiring 4000J of work.
b)What must the constant power supply to the flywheel (in watts) beto bring it back to it's initial speed in a time of 5.00 s?
asked 2021-02-21
A 15.0 kg block is dragged over a rough, horizontal surface by a70.0 N force acting at 20.0 degree angle above the horizontal. The block is displaced 5.0 m, and the coefficient of kinetic friction is 0.3. Find the work done on the block by ; a) the 70.0 N force,b) the normal force, and c) the gravitational force. d) what is the increase in the internal energy of the block-surface system due to friction? e) find the total change in the kinetic energy of the block.
...